產品說明:
採用高能量陶瓷光源(中紅外光及遠紅外光)、高通量光學元件、高敏感度DLATGS檢測器(S/N Ratio:60,000:1)。內置標準的動態校正(ADA)系統及高效自動電子除濕装置,具備自我診斷功能和狀態監視器,遵照JP/EP/ASTM的有效性。覆蓋近紅外、中紅外和遠紅外區,滿足多種領域應用需求的三種檢測器。撘配操作簡易的FTIR軟體LabSolution IR,支持FDA21CFR Part II。
產品規格:
Interferometer
|
Michelson interferometer (30 degree incident angle)
Equipped with Advanced Dynamic alignment system
Sealed interferometer with an automatic Dehumidifier
|
Optical system
|
Single beam optics
|
Beam splitter
|
Germanium-coated KBr plate for Middle IR (Standard)
Germanium-coated CsI plate for Middle/Far IR (Optional)
Silicon-coated CaF2 plate for Near IR (Optional)
|
Light source
|
High-energy Ceramic for Middle/Far IR with 3 years guaranteed
Tungsten lamp for Near IR (Optional)
|
Detector
|
DLATGS detector with Temperature Control for Middle/Far IR (Standard)
MCT(Hg-Cd-Te) detector with Liquid Nitrgen Cooling for Middle IR(Optional)
InGaAs detector for Near IR (Optional)
|
Wavenumber range
|
7,800 - 350 cm-1(Standard)
12,500 - 240 cm-1 (Optional. See Figure for detail)
|
Resolution
|
0.25 cm-1,0.5 cm-1, 1 cm-1, 2 cm-1, 4 cm-1, 8 cm-1, 16 cm-1 (Middle/Far IR)
2 cm-1, 4 cm-1, 8 cm-1, 16 cm-1 (Near IR)
|
S/N ratio
|
60,000:1 or higher(Standard; 4cm-1 resolution, 1 min. scan, around 2,200cm-1, peak-to-peak)
6,000:1 or higher(Microscope; Transmittance mode, aperture 50¡Ñ50μm, 8cm-1 resolution, 120 scans)
8,000:1 or higher(MCT measurement; 4cm-1 resolution, mirror speed 9mm/s, 120 scans, MCT detector)
2,000:1 or higher(Rapid scan; 16cm-1 resolution, mirror speed 40mm/s, 1 scan, MCT detector)
10,000:1 or higher(NIR measurement; 4cm-1 resolution, mirror speed 2.8mm/s, 34 scan, InGaAs detector)
* SN ratio with a DLATGS detector is 48,000:1 or higher when a MCT kit or an NIR kit is mounted.
* When a sample compartment window is changed to a KRS-5, the SN ratio is 75% of that attained with a KBr window.
|
Mirror speed
|
4-step selection of 2.0, 2.8, 5, or 9mm/sec
10, 20, 30, or 40mm/sec for Rapid Scan (option)
|
Data sampling
|
He-Ne laser with 30 months guarantee
|
Sample compartment
|
Automatic Accessory Recognition
200 (W) x 230 (L) x 170 (H) mm
Center Focus
|
Dimensions
|
600 (W) x 665 (D) x 295 (H) mm
|
Weight
|
47Kg
|
應用分析:
Automobiles:
Material identification tests
Analysis of contaminant
Failure analysis
Chemicals and Polymers:
Raw material identification tests
Qualitative analysis of plasticsand rubber
Identification of functional groups of synthetic products
Analysis of surface preparation agents
Analysis and thickness measurement of thin films
Analysis of catalysts
Analysis of paints and coatings
Analysis of contaminant
Quantitative analysis
Food Products:
Raw material identification tests
Packaging material identification tests
Analysis of contaminant
Medicine:
Raw material identification tests
Identification of functional groups
of synthetic products
Identification of functional groups
of natural products
Analysis of contaminant
Metals:
Qualitative analysis of thin
films on metal plates
Analysis and thickness
measurement of thin films
Analysis of contaminant
Electricity, Electronics and Semiconductors:
Thickness measurement of
epitaxial films
Quantitative analysis of interstitial
oxygen and substituted carbon
Quantitative analysis of phosphorus
and boron in BPGS
Quantitative analysis of hydrogen
concentration in nitride film
Quantitative analysis of hydrogen
concentration in amorphous silicon
Detection of brominated flame
retardants
Analysis of thin films
Analysis of contaminant
Failure analysis
Analysis of semiconductor gases
Construction:
Material identification tests
Degradation analysis of coatings
Cosmetics:
Material identification tests
Analysis of contaminant
Failure analysis
相關選購/附件:
DRS-8000A
SRM-8000A
RAS-8000A
ATR-8000A
ATR-8200HA
MIRacle A
DuraSamplIR A Series
Gas Cell
ASC-8000T
DRS-8010ASC
Sample Switcher 21
Cells/Cuvettes
|